|
 MFP
4-28 Zone BS Fire Panel
Our MFP 4 to 28 Zone BS conventional fire panel was designed to fill
the gap between low cost, low specification panels and higher
priced,
higher specification
equipment.
Expandable from 4 to 28
zones in 4 zone steps, the MFP's features (4 sounder
circuits, head-out fault indication and two on-board fire relays) plus
its compatibility with a wide range of expansion boards makes it one
of the most sophisticated BS5839-4 compliant fire panels available.
Extremely popular in the Middle East and other non-European countries,
the MFP boasts a wide range of engineering functions including one
man detector test, sounder walk test, sounder isolate, sounder delay,
auxiliary
isolate and an optional short-circuit = fire facility (pre-1980 BS,
no resistors in call points).
Key MFP features:
- Fully compliant with BS5839 Part 4
- Microprocessor based design
- Robust metal lid and metal back box
- Four sounder circuits and head out fault indication
provided as standard
- End of line units included (one per zone)
- True three wire operation of sounder and detector circuits
(Ov is common) for considerable cost savings on installation
- Separate indication of open circuit fault, short circuit
fault, head out fault, sounder fault and battery/power supply fault
- Non-latching ‘class change’ sounder input,
latching fire and non-latching fault outputs (available via optional
MFPX expansion loom)
- Non-latching zones facility for cross connection to other
panels
- Wide range of engineer facilities including one man detector
test, sounder walk test, sounder isolate, sounder delay and auxiliary
isolate
- Up to eight two-wire repeaters with full external control
(except isolate) per system (requires one FF596T Repeater Transmitter
PCB fitted at the main panel)
 |
|
|
|
Additional MFP range instructions can be downloaded
from our Downloads section |
|
